[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] Stonebeat HA problem
We had encounterd the same problem a year ago. It's probably a quad driver's problem. The work around is: use Sun quad driver version 2.1 and apply the patch #105541-05 HTH # the information may be a little bit old... Pedro Fernandes wrote: >Hello, > >I'm installing the Stonebeat HA version 3.1 and I have the following >configuration: > >Hardware: >2 Sun Servers 220R with 1 Quad cards. I use qfe0 - qfe2 to connect to our >network segments through the switches and use a cross over UTP cable to >connect the hme0 network cards together. I also use serial link between the >two Firewalls or heartbeat. The external interfaces qfe0 and qfe2 have the >same MAC address on both nodes. > >Software: >Solaris 2.6 >CheckPoint FW-1 V4.1 >StoneBeat V3.1 > >Problem: > >I can reboot/shutdown the PRIMARY and the network is still OK because the >SECONDARY automatically changes it's status from OFFLINE to ONLINE. All I >need to do then is to manually switch the PRIMARY back from OFFLINE to >ONLINE after the reboot. The problem is that when the primary comes back >ONLINE I lose connectivity on the external interfaces and I only can get it >back by starting a snoop command on that interface (at least was the only >way I found out). The same happens if I reboot the SECONDARY and switch to >ONLINE after the reboot. Then the external interfaces are unreachable until >I start a snoop. > >Have anybody saw something like this? Does it make any sense, to get back >the connectivity after starting a snoop? > >Regards, > >Pedro Fernandes > > >================================================================================ > To unsubscribe from this mailing list, please see the instructions at > http://www.checkpoint.com/services/mailing.html >================================================================================ ---- MIKI Ryoji [email protected] ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|