UDP 500
packets are returning from the secure remote firewall I am trying to reach.
I am able
to connect as long as I do not NAT the SecuRemote users.
NATing on
the Client Side. This same client
works on another Firewall system but they are using 4.1 SP2 on Nokia.
Thanks
Steven
-----Original
Message-----
From: Gibson, Brian
[mailto:[email protected]]
Sent: Friday, March 09, 2001 9:25
AM
To: 'Steven Zimmerman'; Fw1
Mailing List (E-mail)
Subject: RE: [FW1] Secure Remote
and NAT issues
When you say you see the IKE packet return
are you talking about the UDP 500 ISAKMP packet or protocol 50 packets?
Do you have other users that can
successfully use this FW for VPN?
When you say you are NATing traffic where
exactly is the NAT occuring? On the clien side or FW side?
-----Original Message-----
From: Steven Zimmerman [mailto:[email protected]]
Sent: Thursday, March 08, 2001 8:14 PM
To: Fw1 Mailing List (E-mail)
Subject: [FW1] Secure Remote and NAT issues
I have a client that is using 2 Nokia
IP440 with ipso 3.2.1 and FW-1 4.0SP5
I can not get Secure Remote to work via
NAT. I did all the changes
(objects.C, my firewall rules, etc) but this one client will not
work.
Using IKE I see my request sent out and I receive back an IKE
packet from
the firewall but I always get Error: Communication with the site
x.x.x.x has
failed.
Any thoughts??
BTW> I can get into other sites via the
same secure remote client and
network.
Thanks in advance!
Steven Zimmerman
CIO
IR Network Solutions
fax
================================================================================
To unsubscribe from this mailing list,
please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================