RE: [FW1] FW-1 One External Interface- NAT to several public addresses

[Ricardo Mirez Ballesteros <rmirez@FW1-NOSPAMwiese.com.pe>]

NAT is performed by the FW-1, not by the box or its OS.  You must add static
arp entries to associate the physical address of your external interface to
the valid IP addresses of your NAT configuration.

Regards

-----Mensaje original-----
De: Velasquez Venegas Jaime Omar [mailto:jaime@ulima.edu.pe]
Enviado el: Mi�rcoles, 07 de Marzo de 2001 04:57 p.m.
Para: FW1-MailingList (E-mail)
Asunto: [FW1] FW-1 One External Interface- NAT to several public
addresses



My trusted network is defined by a few internal networks.FW-1 should do NAT
every internal network to a different external public address:

192.168.1.0 -> Public_Network_1
192.168.2.0 -> Public_Network_2
192.168.3.0 -> Public_Network_3

Since the box running fw-1 has only one external interface , how should i
overcome this problem?


Thanks









============================================================================
====
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
============================================================================
====


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================