[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] Firewall-1 Upgrade
David, I just recently upgraded from NT4.0 SP4 firewall 4.0 SP3. I first upgraded to NT4.0 SP5 and then upgrade to firewall-1 v4.0 SP5 (SP5 for v4.0 is on the v4.1 CD). I then installed v4.1 along with SP1 for both the fw module and mgmt module. (this is automatic) I then upgraded both the FW and mgmt. to SP3. I too have both the FW module and mgmt. module on 1 machine. Granted, I do not have an elaborate rules base, but I am not having any problems at all. Hope this helps, and if you have any more questions, please feel free to E-mail me directly. Stewart STEWART RAE Network Manager Guthrie Healthcare SystemVoiceFax 03/02/2001 09:51:17 AM "Dame, David" <[email protected]> To: [email protected] Sent by: cc: [email protected] Subject: [FW1] Firewall-1 Upgrade kpoint.com 02/28/2001 12:55 PM I will be upgrading our NT4.0 SP4 firewall tomorrow. The firewall is at version 4.0 sp1. I recently upgraded the firewall from 3.0b with no problems. I thought that I read somewhere that the 4.0 firewall had to be at sp7 before I could upgrade to 4.1 sp2. After reading the documentation it seems that the wrapper takes care of this, meaning that I can upgrade to 4.1 in one shot. I am assuming that the wrapper is the install program that automatically pops up when I insert the CD. We only have one firewall and the management console is on the same box . So does this all seem correct and are there any other issues I should look out for? Thanks, Dave MCSE ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|