[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] - Remote management (monitor window)
Hi, first of all the question about the "Accept FireWall-1 Control Connections" in the GUI (Policy / Properties / Security Policy). If you have left them on this problem should not occur. If you have turned them off, you will have to accept the connections from the Management Module to the Firewall-Module (Service FW1, 256/tcp). If not, the connection will be blocked by a Stealth-Rule or by a Clean-Up Rule The other way round is no problem for the Firewall-Module, because I think you have activated "Accept Outgoing Packets Originating From Gateway"... Hopi it helps, best regards Matthias "Allison, Mark" wrote: > I have a remote firewall which during an fwstart can successfully fetch a > policy from its management server. However, when I try to install a new > policy or view it through the Windows GUI application (Monitor), it displays > an error message of "Resources unavailable" or a broken connection icon, > respectively. If it can fetch the policy from the management server, why > can't I apply changes to the remote firewall or see it in the "Monitor" > window? I've tried reapplying the putkeys several times and cannot get > further than this. > > Mark Allison > > mailto:[email protected] > > > > > > > > > > > > > > ================================================================================ > To unsubscribe from this mailing list, please see the instructions at > http://www.checkpoint.com/services/mailing.html > ================================================================================ begin:vcard n:Leu;Dr. Matthias tel;cell:tel;fax:+49 8102 895 199 tel;home:+49 89 69759390 tel;work:+49 8102 895 190 x-mozilla-html:FALSE url:http://www.aerasec.de org:AERAsec Network Services and Security GmbH adr:;;Wagenberger Strasse 1;D-85662 Hohenbrunn;;;Germany version:2.1 email;internet:[email protected] fn:Dr. Matthias Leu end:vcard
|