[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] Connecting to a SecureRemote system from behind a private firewall
Apologies is this is a FAQ, but I have so far not been able to find the information on the Check Point website. I have a laptop supplied by a client that is set up with the SecureRemote VPN-1 client. This works fine over dial-up. I need to be able to connect via my private LAN, through a basic NAT firewall (currently using FreeSco http://www.freesco.org). When connected this way the authentication works fine, but I cannot connect to any of the client's resources. On my firewall I currently have these external port mappings: TCP 709 TCP 389 TCP 135 UDP 135 which were gleaned from looking at some of the client setup options. These ports are mapped to the same ports on the client machine. What ports need to be mapped from the firewall for this to work? Is there anything else I need to configure on the firewall? TIA, Richard Folwell Riverside Information Systems Ltd ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|