[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Rule 0 ... again ...
Thanks, I'll try that, but I thought that only allowed the _return_ packets in on that interface? Cheers, Anders :) > -----Original Message----- > From: Jim Sweeting [mailto:[email protected]] > Sent: 21. februar 2001 21:35 > To: 'Reed Mohn, Anders'; '[email protected]' > Subject: RE: [FW1] Rule 0 ... again ... > > > Anders, > > I think you need to change the anti-spoofing to include the > 10.0.0.0 network > as well for the interface closest to the ISDN router (192.168.2.1) > > Jim > > ================================================================== > Jim Sweeting > Consultant > Optimation NZ Ltd > 43 College Hill Road > PO Box 106104 > Auckland > > d. +64 9 307 5566 > p. +64 9 309 7918 > f. +64 9 309 7919 > m. +64 25 582047 > e. [email protected] > > This e-mail contains proprietary information some or all of > which may be > legally privileged. It is for the intended recipient only. If > you receive > this email in error, please notify the sender immediately and > permanently > delete this email. If you are not the intended recipient you > must not use, > disclose, distribute, copy or print this e-mail. > > -----Original Message----- > From: Reed Mohn, Anders > [mailto:[email protected]] > Sent: Thursday, 22 February 2001 9:11 a.m. > To: '[email protected]' > Subject: [FW1] Rule 0 ... again ... > > > > OK, 5th try. This computer seriously needs retirement. > I'm sick of writing this email now ... > > I know this is a reoccurring subject, and I was > hoping I'd be able to solve it by looking at the archives > and reading the lst, but no... > > So, here goes: > > LAN|----|FW|-----|ISDN Router|------|Remote site > > > LAN: 192.168.1.0/24 > ISDN Router: 192.168.2.2 > FW: 192.168.1.1 and ..2.1 > The ISDN router uses DHCP when dialling to remote site. > Remote server: 10.0.0.1 > Spoofing settings: "This net" for both IFs. > > Turning the FW off, everything looks good, so routing seems > to be OK. > With the firewall running, it's a different game: > Traffic to the ISDN-router (192.168.2.2) is let through. > However, FW-1 blocks all traffic to 10.0.0.1 at Rule 0. > > ??? > Any tips as to what I did wrong? > > Cheers, > Anders :) > > > ============================================================== > ============== > ==== > To unsubscribe from this mailing list, please see the > instructions at > http://www.checkpoint.com/services/mailing.html > ============================================================== > ============== > ==== > ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|