[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Solaris routing concern
The traceroute command has an option, "-i qfe0", to give the interface to start the traceroute. If your network masks are classless, add entries into /etc/netmasks to reflect what is in use. The "ifconfig" -a command can so you if the netmasks are correct. This should be a start. -- Glenn CristSr. Network Engineer Bell & Howell Publishing Services 3900 Kinross Lakes Parkway Richfield, OH 44286-9381 -----Original Message----- From: Francisco Rebelo [mailto:[email protected]] Sent: Friday, February 16, 2001 9:23 AM To: Firewall-1 list (E-mail) Subject: [FW1] Solaris routing concern Sorry if this is not exactly on topic but I'm stuck... Here is my situation, I'm new to Solaris and I have a Sparc 220r with 1 HME NIC and 1 QFE NIC. This is the box I would like to put FW-1 on (actually this is about the 5th time I've started from scratch trying to get this to work). The FW-1 docs tell me to make sure the box routes properly before installing FW-1, that's my problem. HME0 is my external interface and QFE0 is my internal. (This is all currently in a test environment) I can, with my internal PC, ping the internal and external interfaces of the Solaris box but cannot ping the pc off the external interface. If I'm on the Solaris box I can ping everything. When I do a traceroute on the Solaris box it warns me that multiple interfaces were detected and then uses the first interface it finds as the source regardless of where I'm routing to. I looks to me like it is completely ignoring the routing tables, is this normal or am I missing something? Cisco Rebelo Network Manager Millbrook Incorporated ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|