[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] FW1> VPN-1 Client won't connect
Hey Dude If you have a FW-1 on the remote office itself then create a VPN between the two firewalls and do not use Securemote on the LAN. Securemote on the LAN cannot connect due to the fact that securemote from behind NAT is not compatible. Rgds At 05:08 PM 07/02/2001 -0600, Mark Maling wrote: Hello, I've got a Firewall-1 setup to VPN with clients using SecuRemote v. 4.1 SP-2 DES. Currently my clients can connect successfully if they dial in to their own ISP and then tunnel in to our VPN. What they cannot do is connect to our VPN across their LAN in our remote office. From the remote office they are going out on the internet through another Firewall-1 running the same versions of firewall and VPN software. They can authenticate to my firewall successfully, and I can see on my firewall that they have authenticated. However, after they authenticate to my firewall, they cannot browse my network or connect to any of my network resources. I'm wondering if there's a setting on their firewall that they need to change in order for the VPN clients to go OUT from their office successfully. The connection to the internet that they have is a DSL line, does anyone know if there is a problem using SecuRemote over a DSL connection? Any insights into this problem would be greatly appreciated.
|