[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] Single Thread query
R M wrote: > > Hi All > > I am looking for some information regarding installing FW-1 on an E450 with > 4 processors. If FW-1 is single threaded - would it use only one > processor? Should we stick with the four to allow for internal Hardware > resilliance? Is there anything special that should be done when installing > to ensure if one processor dies the 2nd etc. would operate? > > I was also hoping to track down some charts etc. regarding throughput that > CheckPoint can handle on various platforms?? > > Any information would be greatly appreciated. > > R > > _________________________________________________________________________ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > ================================================================================ > To unsubscribe from this mailing list, please see the instructions at > http://www.checkpoint.com/services/mailing.html > ================================================================================ Take a look at the discussion we have going on Dual cpu... You'll see much info on that topic. A 450 has many advantages over smaller boxes due to multiple busses and other such goodies. The multi-processor aspect is only a part of the equation. I don't know of any good specing docs. You should see the advanced performance tuning doc on the checkpoint site to figure out memory requirments. Basically, translated connections require 3Mb of memory, static connections about 70K. Multiply these figures by the maximums you want to run, and bingo.. memory requirments. (Plus add a buffer of at least 32Mb.) See the http://www.phoneboy.com/fw1 faq's as well. Cheers, Craig begin:vcard n:Skelton;Craig x-mozilla-html:FALSE adr:;;;;;; version:2.1 email;internet:[email protected] title:Systems Admin / Security Practitioner x-mozilla-cpt:;0 fn:Craig Skelton end:vcard
|