[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Slow Performance after Changing IP address
Try placing the FW's legs IP addresses in your systems HOSTS file and then restart the server. We had a similar problem on our NT FW when we moved to a new server, and we found that this fixed the problem for us. HTH, Mike > -----Original Message----- > From: Sami Zuhuruddin [SMTP:[email protected]] > Sent: ä ôáøåàø 01 2001 21:58 > To: [email protected] > Subject: [FW1] Slow Performance after Changing IP address > > I'm new to the list, so please excuse any topic which was already covered: > > I recently moved our Firewall box from one location to a new office. As a > result, I changed the IP address on the F/W. Subsequently, I reconfigured > the F/W-1 objects via the GUI w/ their new addresses, including the F/W > itself w/ both it's interfaces. > > The problem is that when ever I 'fwstart' the network traffic through the > machine grinds to a halt. > > The machine itself is fine, but network sessions are slow, it feels like > you're downloading on a slow modem (whereas I have a full T1), and telnet > sessions slow down also - anything network related. Then as soon as I run > 'fwstop' things are fine. > > I have tried to remove $FWDIR/database/fwd.h and $FWDIR/database/fwd.hosts > files and restarting, but this didn't seem to help. > > Any help is much appreciated, > > --Sami > ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|