[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Load Balancing Agent
The things Jeff mentioned about Connect Control and Check Point's own HA module are true, but I do have a point of correction: StoneBeat FullCluster is not the only alternative for true firewall clustering. Rainfinity's RainWall is an active/active clustering solution for FW-1/VPN-1. Unlike StoneBeat, RainWall does not require reconfiguration of routers and switches to use multicast MAC addresses. It is a 3rd-party product, but has been designed specifically for FW-1/VPN-1, and thoroughly tested and certified by Check Point for OPSEC compliance. Mark L. Decker Rainfinity [email protected] www.rainfinity.com> -----Original Message----- > From: Jeff Hochberg > Sent: Friday, January 26, 2001 10:10 AM > To: 'Paul Telle'; 'Henrik Widov'; > > Connect Control is not a firewall load balancing product. It > is used for > load balancing web servers (etc.) that sit behind your firewalls. > Checkpoint does have an HA product for firewalls, but it > doesn't perform > load balancing. Only one gateway is active at any given > point in time. > > For true firewall clustering, your only alternative is Stonebeat Full > Cluster. Unfortunately, with the way this product works > (multicast), there > is a very strong possibility that you will also need to touch > the configs on > your routers and/or switches in order to get it to function properly. > ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|