| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FW1] ATM Traffic Shaping on Nokia IP440
- To: <[email protected]>
- Subject: [FW1] ATM Traffic Shaping on Nokia IP440
- From: [email protected]
- Date: Wed, 24 Jan 2001 00:36:28 -0000
- Sender: [email protected]
- Thread-index: AcCFnLLCibpJQev6EdSmxAAQWnFczA==
- Thread-topic: ATM Traffic Shaping on Nokia IP440
Hi,
I have a IP440 with IPSO 3.3 and a ATM-card in it.
Does anyone know how I can do traffic shaping on the Nokia ??
What I mean is that I get f.ex. the following info from my phone company
about my ATM pvc's :
Dest. VPI VCI Bandwith Guarantied BW MBS
PCR SCR
------------------------------------------------------------------------
-----------------------------------------------------------
S 0 201 10mbps 2,5mbps 1000 26050
6512
K 0 202 512kbps 256kbps 100 1268 951
RB 0 207 64kbps 64kbps 100
158 158
Where PCR is Peak cell rate, SCR is sustainable cell rate, and MBS is
maximum burst size.
On Cisco I would do this with (for VCI 201) :
atm pvc 201 0 201 aal5snap 26050 6512 1000
I have to be able to control this on the Nokia box, so that it will not
flood the ATM-link -
And the big question is how can I do that ??
With regards,
Arnor Arnason
Specialist - LAN / WAN
MS Electrical Engineer
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
|
|
