[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] NAT Issue
Title: RE: [FW1] NAT Issue One
thing I forgot to mention is that I cannot connect to the firewall :-(
I see
a serial interface setup but when I try to connect it fails.I have tried both
COM1 and COM2. Can anyone tell me how to connect to the Netra T1 through a
serial interface, from an NT box?
Doing
a telnet/ssh to the firewall also fails, although I have rules defined on the
firewall
Thanks,
Sumit
Did you look into your static routes defined on the OS?! The FW-1 on Solaris depends on static routes and arp entry defined on the Solaris environment. You must tell to your firewall, if you have some router inside your internal network, that the next hop to the arp entry must be the router interface. And also define static routes for every address you are NATing. If the routes were stabilished and didn´t setted on a rc script you probably lost them when you reboot your machine. Here you are some examples: # necessary routes for STATIC ROUTES (where xx.xx.xx.xx is the
valid address and yy.yy.yy.yy is the internal address) Regards, -----Original Message----- Hi, I have been asked to look after the firewall in our company
NOC. The person The logs don't tell anything useful. The firewall is CP 4.1
installed on Thanks, Sumit ================================================================================
|