NETWORK PRESENCE ABOUT SERVICES PRODUCTS TRAINING CONTACT US SEARCH SUPPORT
 


Search
display results
words begin  exact words  any words part 

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FW1] problem with ipso3.3 and fw4.1sp2



i can really only say check the following:

-when you boot up the appliance are there any messages referring to the boot
manager and image revision ?
-check that 'cpconfig' was run from under the
'/opt/FireWall-1-des.v4.1.SP-2.ipso-3.3.F/bin' directory
-'md5' the package and check it's integrity with the Nokia site
-delete the package and 'newpkg' it onto the appliance again

"Cihan Subasi (Garanti Teknoloji)" wrote:

> yes it is....
>
> -----Original Message-----
> From: Andrew Lorriman [mailto:[email protected]]
> Sent: Monday, January 22, 2001 1:22 PM
> To: Cihan Subasi (Garanti Teknoloji)
> Cc: [email protected]
> Subject: Re: [FW1] problem with ipso3.3 and fw4.1sp2
>
> hi Cihan
>
> in Voyager/Lynx is the following package activated:
>
>  (*) On ( ) Off Check Point FireWall-1 (DES) v4.1 SP-2 (Fri Nov 10
>    15:10:10 PST 2000 bld 24.1) /opt/FireWall-1-des.v4.1.SP-2.ipso-3.3.F
>
> best regards - Andrew
>
> "Cihan Subasi (Garanti Teknoloji)" wrote:
>
> > I downloaded the the bundle for ipso3.3 and installed from the bundle...
> >
> > nk33.v41.des.tgz
> >
> > -----Original Message-----
> > From: Andrew Lorriman [mailto:[email protected]]
> > Sent: Monday, January 22, 2001 10:08 AM
> > To: [email protected]; [email protected]
> > Subject: [FW1] problem with ipso3.3 and fw4.1sp2
> >
> > hi Cihan
> >
> > basically, i believe the error you are seeing is because you've
> > installed the 4.1 SP2 (or lower) for IPSO 3.2.x.on IPSO 3.3 .The process
> > is to:
> >
> > a. upgrade the boot manager (IP 330 / IP650)
> > b. upgrade the IPSO image
> > c. install 'fw4.1-SP-2-ipso3.3.F-des.tgz' - the Firewall-1 release
> > specific to this IPSO image version
> >
> > the Nokia Support Site has this all, plus the exact details for steps
> > 'a, b and c'. I also believe if you don't have support access, applying
> > for it is fairly straightforward as you just need the Serial Number of
> > your appliance + your  usual company details ....though don't quote me
> > on the latter :0)
> >
> > hope that resolves your issue
> > cheers - Andrew



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================



 
----------------------------------

ABOUT SERVICES PRODUCTS TRAINING CONTACT US SEARCH SUPPORT SITE MAP LEGAL
   All contents © 2004 Network Presence, LLC. All rights reserved.