[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] problem with ipso3.3 and fw4.1sp2
hi Cihan in Voyager/Lynx is the following package activated: (*) On ( ) Off Check Point FireWall-1 (DES) v4.1 SP-2 (Fri Nov 10 15:10:10 PST 2000 bld 24.1) /opt/FireWall-1-des.v4.1.SP-2.ipso-3.3.F best regards - Andrew "Cihan Subasi (Garanti Teknoloji)" wrote: > I downloaded the the bundle for ipso3.3 and installed from the bundle... > > nk33.v41.des.tgz > > -----Original Message----- > From: Andrew Lorriman [mailto:[email protected]] > Sent: Monday, January 22, 2001 10:08 AM > To: [email protected]; [email protected] > Subject: [FW1] problem with ipso3.3 and fw4.1sp2 > > hi Cihan > > basically, i believe the error you are seeing is because you've > installed the 4.1 SP2 (or lower) for IPSO 3.2.x.on IPSO 3.3 .The process > is to: > > a. upgrade the boot manager (IP 330 / IP650) > b. upgrade the IPSO image > c. install 'fw4.1-SP-2-ipso3.3.F-des.tgz' - the Firewall-1 release > specific to this IPSO image version > > the Nokia Support Site has this all, plus the exact details for steps > 'a, b and c'. I also believe if you don't have support access, applying > for it is fairly straightforward as you just need the Serial Number of > your appliance + your usual company details ....though don't quote me > on the latter :0) > > hope that resolves your issue > cheers - Andrew ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|