[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] FW1 <-VPN-> Sonicwall
Make sure the encryption rules are installed above your stealth rule (your Any - Firewall - Any - Drop rule). To test, try pinging a remote internal ip address or accessing a service of one of the remote internal machines, i.e. ftp, telnet, http, etc. In other words, if one of the networks has private addressing (i.e. 10.x.x.x.) behind the firewall, the other network should be able to ping or use a service via the private address. If it works, the CP logs will show the communication as decrypt or encrypt, depending on the direction of travel. Another thing to check is if the Sonic side is using NAT (private addressing 10.x.x.x.), you must specify the private network address in Checkpoint's definition for the Sonicwall Network. Good luck Gus > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of bill > chmura > Sent: Tuesday, December 12, 2000 2:04 PM > To: [email protected] > Subject: [FW1] FW1 <-VPN-> Sonicwall > > << File: BDY.TXT >> <<attachment: winmail.dat>>
|