[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] ifconfig
Alberto, On Sun: eeprom local-mac-address?=true and reboot. Robert - - Robert P. MacDonald, Network Engineer Team Lead, e-Business Infrastructure G o r d o n F o o d S e r v i c e Voice:email: [email protected] >>> Alberto Díaz <[email protected]> 11/28/00 5:32:53 AM >>> > > Hi, > > I need know which is the MAC adress to do static NAT but if i use the >command ifconfig I get the same adress "0:b4:0:80:d2:9c" for both >interfaces, and I get the same if I execute the command dmesg to see the >boot messages. > > # ifconfig -a > > lo0: flags=849<UP,LOOPBACK,RUNNING,MULTICAST> mtu 8232 > inet 127.0.0.1 netmask ff000000 > > iprb0:flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500 > inet 217.155.18.9 netmask fffffff0 broadcast 217.155.18.15 > ether 0:b4:0:80:d2:9c > > iprb1: flags=863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST> mtu 1500 > inet 10.1.1.1 netmask ffffff00 broadcast 10.1.1.255 > ether 0:b4:0:80:d2:9c > > How I can do to get the real MAC adress, I need this to > > " arp -s < valid IP > < externa ether adress > pub " > > Thank you. > Alberto. ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|