NETWORK PRESENCE ABOUT SERVICES PRODUCTS TRAINING CONTACT US SEARCH SUPPORT
 


Search
display results
words begin  exact words  any words part 

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FW1] impossible to install rules with GUI (Next hop)



The problem is coming from the old configuration files.
When I' using a new configuration FW4.1/SP1 on this machine, there is no
problem.

I've tried to backup the minimum files which are object.C / rulebases.fws /
fwauth.NDB
same problem, how is it possible to verify the object.C file ?

laurent.

> Did you try and run the GUI, using the IP address
> of the management station? What was the answer
> to Mike Glassman's question(do you see anything
> at all in the GUI, after it comes up?)?
>
> Verify that the fw object has the gateway installed(or
> something like that) option checked. Verify the fw object
> is correct. If you need to, until the GUI is fixed, edit
> $FWDIR/conf/objects.C to verify/fix the fw ws object.
>
> >>> "laurent" <[email protected]> 11/23/00 9:08:25 AM >>>
> >
> >the object (firewall module) is already created.
> >and I didn't have the status for my firewall module in the system status.
> >
> >
> >> Use the IP address instead of the name.
> >>
> >> - -
> >> Robert P. MacDonald, Network Engineer
> >> Team Lead, e-Business Infrastructure
> >> G o r d o n   F o o d    S e r v i c e
> >> Voice:email: [email protected]
> >>
> >> >>> "laurent" <[email protected]> 11/23/00 8:29:31 AM >>>
> >> >
> >> >thanks for replying.
> >> >
> >> >same prob.
> >> >
> >> >something special, the GUI can't resolve any names
> >> >The DNS configuration is ok on the NeTe box.
> >> >
> >> >The system status can't find the firewall module ??
> >> >
> >> >laurent.
> >> >
> >> >> The problem occur when your objetcs.C is greater than 1Mb
> >> >>
> >> >> I solved the same issued by adding FW_BUF_SIZE 3000000 as a system
> >> >> environnement variable
> >> >>
> >> >> for NT: Add this variable as system variable
> >> >> for SOLARIS: setenv FW_BUF_SIZE 3000000
> >> >>
> >> >> -----Original Message-----
> >> >> From: Mike Glassman - Admin [mailto:[email protected]]
> >> >> Sent: Thursday, November 23, 2000 11:44 AM
> >> >> To: 'laurent'
> >> >> Cc: 'fw-1 listserv'
> >> >> Subject: RE: [FW1] impossible to install rules with GUI client
> >> >>
> >> >>
> >> >>
> >> >> Laurent,
> >> >>
> >> >> When you say nothing, do you mean the window of the policy install
> >opens
> >> >and
> >> >> then nothing happens at all ? Do you get even one line in there ?
How
> >long
> >> >> have you waited ? Has it given you an error message stating that
it's
> >> >timed
> >> >> out ?
> >> >>
> >> >> I had a similar issue, and we did two things to resolve it :
> >> >>
> >> >> 1. Added memory (but that is not allways a solution)
> >> >> 2. Created a hosts file with the firewall legs defined in there so
the
> >> >> firewall got that info faster
> >> >>
> >> >> It worked for us.
> >> >>
> >> >> Mike
> >> >>
> >> >> > -----Original Message-----
> >> >> > From: laurent [SMTP:[email protected]]
> >> >> > Sent: ä ðåáîáø 23 2000 11:31
> >> >> > To: [email protected]
> >> >> > Subject: [FW1] impossible to install rules with GUI client
> >> >> >
> >> >> >
> >> >> > Fw1 4.1 SP1, MC on a Nt box,FW on a ultra box
> >> >> > The configuration is coming from a version 4.0.
> >> >> >
> >> >> > I can install rules with command line, but when I want to use the
GUI
> >> >> > client, the install window is coming and then ... nothing ??
> >> >> >
> >> >> > any idea .;
> >> >> >
> >> >> > thanks for replying.
> >> >> > laurent
>



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================



 
----------------------------------

ABOUT SERVICES PRODUCTS TRAINING CONTACT US SEARCH SUPPORT SITE MAP LEGAL
   All contents © 2004 Network Presence, LLC. All rights reserved.