[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Securemote issue
I already checked that too, I am doing my tested using a dialer, anyway I can see in my fw event log actions which means packets are going throw him so I do not know if it a routing issue. -----Original Message----- From: Michael Liberte [mailto:[email protected]] Sent: Monday, November 20, 2000 12:05 AM To: 'Idan Dolev'; Firewall_Mailing_List (E-mail) Subject: RE: [FW1] Securemote issue Check to see if your client computer has one of its interfaces configured with IP address that belongs to your internal LAN. If this is the case, change the ip to something else or disable the interface temporarily. The cause: Even though your client can communicate with the EXTERNAL ip of the firewall through its dialup connection, when you try to access hosts on the internal LAN, the TCP/IP stack attempts to send the packets to the interface that is configured with the IP address on the same subnet. Routing... Cheers, Michael, Netvision Integration Team. -----Original Message----- From: Idan Dolev [mailto:[email protected]] Sent: Sunday, November 19, 2000 6:15 PM To: Firewall_Mailing_List (E-mail) Subject: [FW1] Securemote issue Hi guys, Has anybody encountered a problem with securemote where you get authenticated by the firewall but still no communication with the internal lan. I already checked the encryption domain, rewrote the rule, anti-spoofing checked, the user was checked, fwz and IKE had the same behavior. I could see in the event log a decrypt connection to my client be still no data shown on my client. The firewall is 4.1 sp2 on NT, Any comments before I break down and cry...... Idan ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|