|
|
|
|
|
|
|
|
 |
 |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [FW1] NAT and additional subnets
Tim, Creating and or adding to network(s)? If new network is a single, then 4 is not needed. If multiple networks behind new NIC, then 4 is needed. ARP work will be needed most likely. Sane. - - Robert P. MacDonald, Network Engineer Team Lead, e-Business Infrastructure G o r d o n F o o d S e r v i c e Voice:email: [email protected] >>> <[email protected]> 11/16/00 5:46:10 AM >>> > >Hi > >We need to add some more Static NAT and non-NAT machines onto our network. > >Need sanity check on proposed solution:- > >1. Get an additional subnet from ISP (already underway anyway) >2. Configure Internet router External Interface to have new secondary Ip >address from new range (from Step 1) >3. Add new LAN card to Firewall (NT SP4, FW 4.0 SP4) and address from new >range above (from Step 1) >4. Add route on Fwall/router appropriately >5. Change selected user workstations to new IP address range >6. Add new static and non-NAT rules for these workstation >7. Do something with local arp file ? > >Comments please. > >Thanks >Tim Higgins ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|
||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
