[FW1] NAT and additional subnets

[T.Higgins@FW1-NOSPAMeu.hns.com]

Hi

We need to add some more Static NAT and non-NAT machines onto our network.

Need sanity check on proposed solution:-

1. Get an additional subnet from ISP (already underway anyway)
2. Configure Internet router External Interface to have new secondary Ip
address from new range (from Step 1)
3. Add new LAN card to Firewall (NT SP4, FW 4.0 SP4) and address from new
range above (from Step 1)
4. Add route on Fwall/router appropriately
5. Change selected user  workstations to new IP address range
6. Add new static and non-NAT rules for these workstation
7. Do something with local arp file ?


Comments please.


Thanks


Tim Higgins




#**********************************************************************
This message is intended solely for the use of the individual
or organisation to whom it is addressed. It may contain
privileged or confidential information.  If you have received
this message in error, please notify the originator immediately.
If you are not the intended recipient, you should not use,
copy, alter, or disclose the contents of this message.  All
information or opinions expressed in this message and/or
any attachments are those of the author and are not
necessarily those of Hughes Network Systems Limited,
including its European subsidiaries and affiliates. Hughes
Network Systems Limited, including its European
subsidiaries and affiliates accepts no responsibility for loss
or damage arising from its use, including damage from virus.
#**********************************************************************


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================