[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] Problem with Configuration
Hi All, We are in the process of Installing the Firewall-1 Module and are facing a couple of problems :- Background : OS : Solaris 2.6 Checkpoint Ver 4.1 3 Ethernet Interfaces 3 zones are created (Internet, DMZ and the Intranet) The Internet Zone is directly connect to the Router's Ethernet Router has 2 Internet Links configured with 2 different ISP's The Interface on the DMZ of Checkpoint has 1 primary Address and an other virtual interface (These 2 IP Addresses are Public IP's and are provided by the ISP's) On the Router, we have defined Policy based routing which checks for the Source address of any packet coming in and the same will be forwarded to the respective serial ports. Problem : After this excercise was done, the performance of both the Internet links have gone down by 80%. Can we have 2 IP Address for a single Interface on Checkpoint. Practically it works. Also, when we split both the links and have single IP for each interface, then the performance of the link is fine. Please do give me your inputs as how I can go about with this. Thanks & Regards, Chandru ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|