[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] SR over @HOME connection (See Notice Below)
I think you can still NAT on your remote client site but the remote client local ip address must not be in your encryption domain. Yim --- "Reynolds, Tom" <[email protected]> wrote: > > Hi all, > > We were recently able to resolve this same issue > with DSL and the NAT and > LinkSYS router. What I came to realize from the > logs was that the firewall > was issuing a KEY INSTALL to one address (the > routers valid address) and > then traffic tried to come in from the host (NATed > address). That wasn't > going to work. We had the client turn off NAT, use > a valid internet > address, install a personal firewall, and all > worked. > > Sorry I can't be more specific about the LinkSYS > config. I only needed to > get the VPN working, not start troubleshooting DSL > and NAT issues. > > If you need to work it out with NAT, Phoneboy.com > had some info about > LinkSYS and NAT and DSL. Good Luck. > > Tom Reynolds, MCSE, CCNA > _________________________ > Pilgrim Baxter and Associates > Network Security and Engineering > 825 Duportail Rd. > Wayne, Pennsylvania 19087-5525 >> [email protected] > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] > Sent: Thursday, November 02, 2000 1:12 PM > To: Joe Delsol > Cc: FW-1 List (E-mail) > Subject: Re: [FW1] SR over @HOME connection (See > Notice Below) > > > > > DSL is not support by Checkpoint. It works sometimes > and sometimes it does > not. > > > > > Joe Delsol <[email protected]> on 11/02/2000 > 12:46:29 PM > > To: "FW-1 List (E-mail)" > <[email protected]> > cc: (bcc: Gail Hulse/DEWEY) > Subject: [FW1] SR over @HOME connection > > > > > > Is anyone able to do this? > I had two users try last night and they had > different results.. The first > could get Authenticated, but the second was prompted > for the USERid/password > and then was not able to reach the server.. The > person that did get > Authenticated was not able to get any packets to the > site after the > Authentication. > > The known difference between the two users is that > the one that did get > Auth. has a linkSYS DSL/Cable broadband router doing > NAT. > > We do have SR working from behind NAT over DSL. > > Any ideas? > Thanks! > Joe > If you want to send direct to me, I'll keep your > post off the list. > > > > ================================================================================ > To unsubscribe from this mailing list, please > see the instructions at > > http://www.checkpoint.com/services/mailing.html > ================================================================================ __________________________________________________ Do You Yahoo!? >From homework help to love advice, Yahoo! Experts has your answer. http://experts.yahoo.com/ ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|