[FW1] FW-1 Setup

[Ben Cuthbert <benjamin.c@FW1-NOSPAMlineone.net>]

Hi all 

could some tell me if this firewall setup would work 

i have a range of ip address lets say 

10.10.10.40  to 10.10.10.70

my router that is by my provider is 10.10.10.39

my firewall has 2 interfaces

on that faces the router 10.10.10.40
and on that faces local net 10.10.10.41

now my windows machine on the internal network is 10.10.10.45
and what i was trying to do is disable the arp requests on the firewall 
and add then statically , 

so i would give my windows machine something like this

arp -s 10.10.10.45 and then mac address of the internal interface of the
firewall

if it did this would it work 

bec i am have problems trying to get this setup to work


================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================