[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] VRRP testing
Hi all, I have just installed and configured two Nokia IP440 with "Monitored Circuit" I didnt install the firewall module yet and I want to test that VRRP is working fine. I can see the VRRP packets on the HUB from the Primary. When I disconnect it, the backup box takes over and I can see the VRRP packets as well. Can I do a testing by for example telneting/pinging to the virtual IP address to make sure that VRRP is workign OK before I go ahead and install the firewall module. Thanks... Haitham This message and any attachments are confidential to the ordinary user of the e-mail address to which it was addressed and may also be privileged. If you are not the addressee you may not copy, forward, disclose or use any part of the message or its attachments and if you have received this message in error, please notify the sender immediately by return e-mail and delete it from your system. Internet communications cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, arrive late or contain viruses. The sender therefore does not accept liability for any errors or omissions in the context of this message which arise as a result of Internet transmission. Any opinions contained in this message are those of the author and are not given or endorsed by the SABB nor HSBC Group company or office through which this message is sent unless otherwise clearly indicated in this message and the authority of the author to so bind the SABB nor HSBC entity referred to is duly verified. ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|