|
Hello,
I have fw-1 ver 4.1 on Windows NT 4.0 with SP 4. My
license allow 100 ip address.
I have $FWDIR\conf\exernal.if with my external
interface's name: ALN2012
When I run fw lichosts I get
all my internal ip addres and too many external ip address too. I can
distinguich in this list between the internal (ALN3251) and exernal (ALN2012)
interfaces wich they belong. Something so:
ALN3 10/10/2000 17:33> host:1.0.168.192 src:192.168.0.1
ALN2
10/10/2000 17:33> host:34.5.12.10 src:10.12.5.34
ALN2 10/10/2000
17:33> host:40.18.12.10 src:10.12.18.40
ALN2 10/10/2000 17:33>
host:46.2.12.10 src:10.12.2.46
ALN2 10/10/2000 17:33> host:243.2.12.10
src:10.12.2.243
ALN2 10/10/2000 17:33> host:12.54.12.10 src:10.12.54.12
ALN2
10/10/2000 17:33> host:117.67.12.10 src:10.12.67.117
ALN2 10/10/2000
17:33> host:12.67.12.10 src:10.12.67.12
ALN2 10/10/2000 17:33> host:235.71.12.10 src:10.12.71.235
ALN2
10/10/2000 17:33> host:132.55.12.10 src:10.12.55.132
ALN2 10/10/2000
17:33> host:17.18.12.10 src:10.12.18.17
ALN2 10/10/2000 17:33> host:69.200.168.192 src:192.168.200.69
ALN2
10/10/2000 17:33> host:8.8.168.192 src:192.168.8.8
ALN2 10/10/2000
17:33> host:2.128.168.192 src:192.168.128.2
ALN2 10/10/2000 17:33>
host:233.73.12.10 src:10.12.73.233
My internal network is 192.168.0.x and my ISP
network is 10.12.y.y
What is happend? Is this ok???
Thank you,
Carmen
| 
