[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] fwz
hi group i have read some of the checkpoint documentation on vpns using fw-1 and securemote. what i want to do is as follows: securemote client (fwz) | | unknown firewall | | firewall-1 (fwz) assuming there are no proxies or nat involved in the above what traffic would I have to request be allowed through the unknown firewall (i think this is udp port 259) are there any others required as phoneboy mentions IP Protocol 94 bi-directionally when FWZ encapsulation is used.) So what I am asking is provided port 259 is opened on the unknown router and both the securemote client and fw-1 are correectly configured, will I be able to have an encrypted connection? Many Thanks Richard Thornton _________________________________________________________________ Common Service Agency Disclaimer The information contained in this message may be confidential or legally privileged and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. _________________________________________________________________ ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|