[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] bloomberg services
ivan, When you telnet are you doing so from an inside host or from the firewall? Maybe there are routing issues and/or NAT that need's to be setup. Also, are your Bloomberg client known by Bloomberg? Do you get an error at the client when you attempt to connect? If Bloomberg doesn't have your Bloomberg client serial #'s registered you won't be able to get data. Kevin Martin [email protected] -----Original Message----- From: Ivan Fox [mailto:[email protected]] Sent: Friday, October 06, 2000 8:14 PM To: Fw1-Wizards (E-mail); fw-1-mailinglist (e-mail) Subject: [FW1] bloomberg services We are trying to setup a couple users to use bloomberg finanical news. The dedicated software requires a series of 100 udp ports and 50 tcp ports open. For instance, the udp ports are 48100 to 48200 and tcp ports are 4920 to 4970. Talked to Check Point (gold) technical support. Two "specialists" offered two different answers. One said that we should use the source port range in the workstation object. The other said we need to use port range instead of workstation object. Confused and the solution is not working. Any suggestions are appreciated. >From the firewall log, we could see the firewall has accepted the packets, but no response from bloomberg servers. However, when we telnet using a defined port, e.g., 4921. The bloomberg servers responsed! There is only one rule saying "any" "bloomberg servers" "tcp-port range and udp-port range" "accept". Your comments/suggestions are badly needed. Regards, Ivan ============================================================================ ==== To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ============================================================================ ==== Attachment:
Kevin Martin (E-mail).vcf
|