[FW1] Routing & Multiple Subnets

[MJohnston@FW1-NOSPAMnhra.com]

I have a FW1 4.0 box and I have objects defined with valid IP addresses and
NAT.  I can get to all of the servers on the .1 network, but can't get to
any of the servers on the other subnets. My configuration is as follows:

Internet ---- router ---- FW1 ---- 172.16.1 network ---- Internal Gateway
(router) ---- 172.16.2 network
							172.16.1.5
							|	|
							|	|
						172.16.3 net	172.16.6 net

In the routing table on the FW, the routes are as follows:

Network Destination		Gateway
172.16.1.0			172.16.1.200 (internal NIC of FW)
172.16.2.0			172.16.1.5 (internal gateway - router)
172.16.3.0			172.16.1.5 (internal gateway - router)
172.16.6.0			172.16.1.5 (internal gateway - router)

Not only can I not get to the other subnets, when I try to add a route for a
server to one of these subnets (valid IP, netmask, gateway, interface), I
get an error message that says, "Route addition failed: 87."

Any assistance would be most appreciated.

Thanks, Michelle
_____________________
Michelle Johnston
Network Manager, NHRA
2035 Financial Way
Glendora, CA 91741
phone:fax:MJ@nhra.com



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================