[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [FW1] Specifying a group of ports
Thanks, I tried that first and thought it didn't work but came to find out I was just reading my snoop output wrong. Thanks Jim Edwards -----Original Message----- From: Frost, Timothy E [mailto:[email protected]] Sent: Wednesday, September 20, 2000 12:33 AM To: 'James Edwards'; '[email protected]' Subject: RE: [FW1] Specifying a group of ports > From: James Edwards [SMTP:[email protected]] > Subject: [FW1] Specifying a group of ports > > > I apologize in advance for asking this because I know it has been asked > many > times before but I can't find it in my archives. > > Can someone tell me how to specify a range of ports. I am trying to set > up > Legato to backup through my firewall and it needs a range of ports. > > The best example is X11.. Create the TCP or UDP service (NOT a port range!) and specify the range in the Port field. For the default X11 service, the port field reads '6000-6063' Tim -- Timothy Frost mailto:[email protected] EDS New Zealand Fax: +64-4-495-0473 8 Gilmer Terrace Phone: +64-4-495-0504 P O Box 3647 Wellington New Zealand > > Thanks in advance. > > Jim Edwards > Systems Manager > Texas Secretary of State > > > ========================================================================== > ====== > To unsubscribe from this mailing list, please see the instructions at > http://www.checkpoint.com/services/mailing.html > ========================================================================== > ====== ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|