[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [FW1] IPSec
Hi Using CP 4.0 SP4 on NT (going to CP 4.1 SP2 in next month or two). I am going to have to look at connection to 3rd parties soon (only had to do internal stuff so far - so forgive my ignorance here) - and used ISAKMP/OAKLEY for internal VPN and FWZ for Secure Remote. Question:- Can I use an easy-to-use (automatic) encryption scheme for 3rd parties (I know that FWZ is a non-starter for non-CP firewalls) or do I have to use Manual IPSec - what's involved ? TIA Tim Higgins #********************************************************************** This message is intended solely for the use of the individual or organisation to whom it is addressed. It may contain privileged or confidential information. If you have received this message in error, please notify the originator immediately. If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message. All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Hughes Network Systems Limited, including its European subsidiaries and affiliates. Hughes Network Systems Limited, including its European subsidiaries and affiliates accepts no responsibility for loss or damage arising from its use, including damage from virus. #********************************************************************** ================================================================================ To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================================================
|