[FW1] Setting up and installing NAT

["benjamin.c" <benjamin.c@FW1-NOSPAMlineone.net>]

Hi everyone,

i have been given an address range by my provider it is 16 ip addresses
that address range it 212.16.227.146 to 212.16.227.158

and then routers address is 212.16.227.145.

Now what i would lke to do is use the address range of 192.168.1.0
i am not sure what subnet mask this sits on .

now how would i go about doing this.

i have setup the firewall with eternal address for internet 212.16.227.146 
and then internal interface of 192.168.1.147 with subnet 255.255.255.240

then the internal test machine i have has an ip address of 192.168.1.148 on 
255.255.255.240
and then a default gw of 192.168.1.147.

now what else do i need to do to get this to work

System Administrator 
http://www.Apocolips.org.uk

( ) ( ) ( ) ( ) ( )



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================