[FW1] SecuRemote Connection Problem

["Christian D. Anschuetz" <canschue@FW1-NOSPAMuptyme.com>]

Hello:

I have been unable to get SecuRemote to work with our firewall.
Unfortunately, the problem is not one of the more common configuration
issues, but rather the result of the following environment:

SR Client --- Internet ---- Router --- (Nat'd 1918 addr) --- FW

As you can see, the firewall's external address is actually an RFC 1918
address that is Nat'ed at the router (with a dedicated, non-shared public IP
address).  No filtering is taking place at the router at all (in fact,
telnetting to the SR ports succeeds no problem).

Problem manifests itself as:  Key exchange occurs; attempts to access
internal network causes prompt; after time-out the message "No response from
server - check user name and password"; NO LOG INFORMATION WHATSOEVER.

Any ideas?  I am stumped.

Many thanks in advance.

Christian



================================================================================
     To unsubscribe from this mailing list, please see the instructions at
               http://www.checkpoint.com/services/mailing.html
================================================================================