| |
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[FW1] NAT
Hi,
I need your help about a Nat in this configuration:
fw1 ver 4.1 on SUN
host171 (171.1.200.43)
|
|hme1 171.1.200.50
------------------------
| FW1 |---hme2 192.168.64.1----fw----internet
---------------------------
|hme0 60.20.20.80
|
host60 (60.20.20.89)
I have from 171.1.200.43 goes in Internet and goes to host 60.20.20.89.
I've define 2 Nat hide:
source desti serv source tras dest trasl serv install
host171 host60 any origin origin origin all
host171 any any hme2 origin origin all
but if i snoop on hme1 and hme0 I see:
on hme1:
171.1.200.43 --> 60.20.20.89 echo request
171.1.200.43 --> 60.20.20.89 echo request
171.1.200.43 --> 60.20.20.89 echo request
on hme0
171.1.200.43 --> 60.20.20.89 echo request
60.20.20.89 --> 171.1.200.43 echo replay
171.1.200.43 --> 60.20.20.89 echo request
60.20.20.89 --> 171.1.200.43 echo replay
171.1.200.43 --> 60.20.20.89 echo request
60.20.20.89 --> 171.1.200.43 echo replay
and on host171 I've Echo request time out.
On fw1 I've this route:
source gtw
172.1.0.0 172.1.200.43
>From fw1 i can ping host60 and host171, from host171 i can ping hme1 and hme0.
Can you help me?
thanks a lot
regards
manus
================================================================================
To unsubscribe from this mailing list, please see the instructions at
http://www.checkpoint.com/services/mailing.html
================================================================================
|
|
